Search Contact information
University of Cambridge Home Department of Engineering
University of Cambridge > Engineering Department > Mechanics, Materials and Design

[ Introduction | Research | Teaching | Publications ]

Michael Sutcliffe - Publications List

Journals

1. W.J. Stronge, M.P.F. Sutcliffe and T Yu. 'Wrinkling of elastoplastic circular plates during stamping.' Experimental Mechanics, 26, 345-353 (1986)
2. M.P.F. Sutcliffe. 'Surface asperity deformation in metal forming processes.' Int. J. Mech. Sci., 30, 847-868, (1988)
3. M.P.F. Sutcliffe. 'Central film thicknesses in elliptical contacts.' Proc. Inst. Mech. Engrs. C203, 387-392, (1989)
4. M.P.F. Sutcliffe. 'Central film thickness charts for elliptical contacts.' Proc. Inst. Mech. Engrs. C204, 273-275, (1990)
5. M.P.F. Sutcliffe and K. L. Johnson. 'Lubrication in cold strip rolling in the 'mixed' regime.' Proc. Inst. Mech. Engrs. C204, 249-261, (1990)
6. M.P.F. Sutcliffe. 'Experimental measurements of lubricant film thickness in cold strip rolling.' Proc. Inst. Mech. Engrs. C204, 263-273, (1990)
7. M.P.F. Sutcliffe. 'Traction measurements in mixed elastohydrodynamic lubrication with a controlled circumferential roughness.' Proc. Inst. Mech. Engrs. C205, 265-273, (1991)
8. M.P.F. Sutcliffe. 'Measurements of the rheological properties of a kerosene metal-rolling lubricant.' Proc. Inst. Mech. Engrs. B205, 215-219, (1991)
9. M.P.F. Sutcliffe and N.A. Fleck. 'Effect of geometry on compressive failure of notched composites.' International Journal of Fracture , 59, 115-132 (1993)
10. M.P.F. Sutcliffe and N.A. Fleck. 'Microbuckle propagation in carbon fibre-epoxy composites.' Acta Metallurgica and Materialia , 42(7), 2219-2231 (1994)
11. Tabary P.E., Sutcliffe M.P.F., Porral F. and Deneuville P. , 'Measurements of friction in cold metal rolling.' ASME Journal of Tribology 118, 629-636 (1996)
12. Sivashanker S., Fleck N.A. and Sutcliffe M.P.F., 'Microbuckle propagation in a unidirectional carbon fibre - epoxy matrix composite.' Acta Metallurgica et Materialia, 44, 2581-2590 (1996)
13. Fleck, N.A. Sutcliffe, M.P.F., Sivashanker, S. and Xin, X.J. 'Compressive R-curve of a carbon fibre-epoxy matrix composite.' Composites Part B, 27(6), 531-541 (1996)
14. Sutcliffe, M.P.F., Fleck, N.A. and Xin, X.J. 'Prediction of compressive toughness for fibre composites.' Proc Royal Society (1996), 452, 2443-2465
15. Sutcliffe, M.P.F. and Fleck, N.A. . 'Microbuckle propagation in fibre composites.' Acta Metallurgica et Materialia, (1997), 45, 921-932
16. Fleck N.A., Sivashanker S. and Sutcliffe M.P.F., 'Compressive failure of composites due to microbuckle growth.' European Journal of Mechanics A/Solids, 16, 65-82 (1997)
17. Sutcliffe, M.P.F. and Rayner, P.J. Experimental measurements of load and strip profile in thin strip rolling, International Journal of Mechanical Sciences, 40(9), 887-899 (1998)
18. Sutcliffe, M.P.F. Flattening of random rough surfaces in metal forming processes, ASME Journal of Tribology, 121, 433-440 (1999)
19. Petras, A and Sutcliffe, M.P.F. Failure mode maps for honeycomb sandwich panels, Composite Structures, 44, 237-252 (1999)
20. Petras, A and Sutcliffe, M.P.F. Indentation resistance of sandwich beams, Composite Structures 46, 413-424 (1999)
21. Sutcliffe, M.P.F. and Le, HR. Measurements of surface roughness in cold-metal rolling in the mixed lubrication regime, STLE Tribology Transactions , 43, 39-44 (2000)
22. Le, HR and Sutcliffe, M.P.F. A two-wavelength model of surface flattening in cold-metal rolling with mixed lubrication, STLE Tribology Transactions, 43(4), 595-602 (2000)
23. Creighton, C.J. Sutcliffe, M.P.F. and Clyne, T.W. A multiple field image analysis procedure for characterisation of fibre alignment in composites, Composites A 32, 221-229 (2001)
24. Ahmed, R and Sutcliffe, M.P.F. Identification of surface features on cold-rolled stainless steel strip, Wear, 244, 60-70 (2000)
25. Le, HR and Sutcliffe, M.P.F. A robust model for rolling of thin strip and foil, Int. J. Mechanical Sciences 43 (6), 1405-1419 (2001)
26. Le, HR and Sutcliffe, M.P.F. Analysis of surface roughness of cold rolled aluminium foil, Wear, 244, 71-78 (2000)
27. Ahmed, R and Sutcliffe, M.P.F. An experimental investigation of surface pit evolution during cold-rolling or drawing of stainless steel strip, ASME J. Tribology, 123, 1-7 (2001)
28. Sutcliffe, M.P.F. and Montmitonnet, P. Numerical modelling of lubricated foil rolling, Revue de Metallurgie - Cahiers d'informations techniques, 98 (5), 435-442 (2001)
29. Petras, A and Sutcliffe, M.P.F. Indentation failure analysis of sandwich beams, Composite Structures 50, 311-318 (2000)
30. Court, RS, Sutcliffe, MPF and Tavakoli, SM. Imaging of adhesively bonded joints - Fracture and failure analysis using video imaging techniques, International Journal of Adhesion and Adhesives 21(6), 455-463 (2001)
31. Le, HR and Sutcliffe, M.P.F. Measurements of friction in strip drawing under thin film lubrication, Tribology International, 35(2) 123-128 (Feb. 2002)
32. Sutcliffe, M.P.F., Le, HR and Ahmed, R. Modelling of micro-pit evolution in rolling or strip drawing, ASME J Tribology 123 791-798 (2001)
33. Le HR, Sutcliffe MPF. A semi-empirical friction model for cold metal rolling, Tribology Trans. 44 (2), 284-290 (2001)
34. Sutcliffe, MPF and Yuwono, AH, Experimental study of microbuckle initiation in a model composite system, Scripta Materialia 45 831-837 (2001)
35. Le HR, Sutcliffe MPF. A friction model for cold strip rolling with two-wavelength surface roughness in the 'mixed' lubrication regime, ASME J Trib
125, 670-677 (July 2003) 36. Le HR, Sutcliffe MPF. Rolling of thin strip and foil: application of a tribological model for 'mixed' lubrication. ASME J Trib 124 129-136 (Jan 2002)
37. Sutcliffe MPF and Georgiades F. Characterisation of pit geometry in cold rolled stainless steel strip. Wear 253 963-974 (Nov 2002)
38. Le HR, Sutcliffe MPF. Evolution of surface pits on stainless steel strip in cold rolling and strip drawing. ASME J Trib 125 384-390 (Apr 2003)
39. Sutcliffe MPF, Combarieu, R, Repoux, M and Montmitonnet, P. Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer layers. Wear 254, 65-79 (Jan 2003)
40. Sharma, SB and Sutcliffe, MPF Draping of woven composites: a progressive drape model. Plastics, Rubber and Composites, 32, 57-64 (Feb 2003)
41. Chang, SH, Sharma, SB and Sutcliffe, MPF. Microscopic investigation of tow geometry of a dry satin weave fabric during deformation, Composites Science and Technology, 63, 99-111 (Jan 2003)
42. Le HR, Sutcliffe MPF. Finite element modelling of the evolution of surface pits in metal forming processes, J Mater Proc. Tech. 145, 391-396 (Feb 2004)
43. Sutcliffe MPF, Le HR and D Farrugia. Simulation of transfer layer formation in strip drawing of stainless steel, Wear 254 523-531 (March 2003)
44. Sharma, SB, Sutcliffe, MPF, Chang, SH. Characterisation of material properties for draping of dry woven composite material. Composites A, 34 1167-1175 (2003)
45. Chang, SH, Sutcliffe, MPF and Sharma, SB. Microscopic investigation of tow geometry changes in a woven prepreg material during draping, Composites Science and Technology 64 1701-1707(Aug 2004)
46. Utsunomiya, H, Sutcliffe, MPF, Shercliff, HR, Bate P, Miller, DB. Evolution of matt surface topography in aluminium pack rolling: Part I - model development. Int. J. Mech. Sci. 46 1349-1364 (Sept 2004)
47. Utsunomiya, H, Sutcliffe, MPF, Shercliff, HR, Bate P, Miller, DB. Evolution of matt surface topography in aluminium pack rolling: Part II - effect of material properties. Int. J. Mech. Sci. 46 1365-1375 (Sept 2004)
48. Sharma, SB, Sutcliffe. A simplified finite element model for draping of woven material. Composites A 35 637-643, (April 2004)
49. Sutcliffe MPF, Combarieu, R, Montmitonnet, P. Effect of additives on friction during plane strain compression of aluminium strip. Wear 257, 1071-1080 (Nov 2004)
50. Le, HR, Sutcliffe, MPF, Wang, PZ, Burstein GT. Surface oxide fracture in cold aluminium rolling, Acta Materialia 52, 911-920 (Jan 2004)
51. Le, HR, Sutcliffe. The effect of surface deformation on lubrication and oxide scale fracture in cold metal rolling, Metallurgical and Materials Transactions B 35 919-928 (Oct 2004)
52. Utsunomiya, H, Sutcliffe, MPF, Shercliff, HR, Bate P, Miller, DB. Three-dimensional topography of the matt surface in aluminium pack rolling. Int. J. Mech. Sci. 46 1083-1096 (Sept 2004)
53. Liu, D, Fleck NA and Sutcliffe MPF. Compressive strength of fibre composites with random fibre waviness. J Mechanics and Physics Solids 52(7) 1481-1505 (July 2004)
54. Le HR, Sutcliffe MPF, Williams JA. Friction and material transfer in micro-scale sliding contact between aluminium alloy and steel. Tribology Letters 18 99-104 (Jan 2005)
55. Utsunomiya, H, Sutcliffe, MPF, Shercliff, HR, Bate P, Miller, DB Influence of friction on roughening of the matt surface in aluminium pack rolling, International Journal of Machine Tools and Manufacture 45 803-809 (Feb 2005)
56. Le HR, Sutcliffe MPF, P. Z. Wang PZ, Burstein GT. Surface generation and boundary lubrication in bulk forming of aluminium alloy. Wear 258 1567-1576 (May 2005)
57. P. Z. Wang PZ, Burstein GT, Le HR, Sutcliffe MPF. The electrode potential of freshly generated aluminium surfaces in lubricating oil. Tribology Letters 18 487-491 (Apr 2005)
58. Stephany A, Le HR, Sutcliffe MPF. An efficient finite element model of surface pit reduction on stainless steel in metal forming processes. J Materials Processing Technology 170 310-316 (Oct 2005)
59. Le HR, Sutcliffe MPF, A multi-scale model for friction in cold rolling of aluminium alloy. Tribology Letters 22 95-104 (April2006)
60. Chung JG, Chang SH, Sutcliffe MPF. Deformation and energy absorption of composite egg-box panels. Composites Science and Technology 67(11) 2342-2349 (May 2007)
61. Skordos AA, Monroy Aceves C, Sutcliffe MPF. A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites. Composites A 38 1318-1330 (May 2007)
62. Liu F, Sutcliffe MPF. Modelling of delamination of ultra low-k material during chemical mechanical polishing. Tribology Letters 25 225-236 (March 2007)
63. Utsunomiya, H, Sutcliffe, MPF, Shercliff, HR, Miller, DB. Experimental investigation of roughening of the matt surface in pack rolling, Journal of Materials Processing Technology 177 501-504 (July 2006)
64. Skordos AA, Sutcliffe MPF. Stochastic simulation of woven composites forming. Composites Science and Technology (2008) 68(1) 283-296
65. Monroy Aceves C, Skordos AA, Sutcliffe, MPF. Design selection methodology for composite structures. Materials and Design, (2008) 29(2) 418-426
66. Fox MN, Sutcliffe MPF. Modelling material transfer in metal rolling using plasticine. Wear 264 18-25(Jan 2008)
67. Barrett SRH, Sutcliffe MPF, Howarth S, Li Z-Y, Gillard JH. Experimental measurement of the mechanical properties of carotid atherosclerotic plaque fibrous cap. J. Biomechanics, 42(11) 1650-1655, 2009
68. Lilikakis A, Sutcliffe MPF. The effect of vancomycin addition to the compression strength of antibiotic-loaded bone cements. International Orthopaedics International Orthopaedics 33 815-819 (2009)
69. Li ZY, Tang T, U-King-Im J, Graves M, Sutcliffe MPF, Gillard JH. Assessment of carotid plaque vulnerability using structural and geometric determinants. Circ J, 72 1092-1099 (2008)
70. Zumpano Z, Fox M, Stronge WJ, Sutcliffe MPF. Impact damage in hybrid braided twill composites. J Materials Science 43 6668-6675 (2008)
71. Kratmann, K.K., Sutcliffe, M.P.F, Lilleheden, L.T., Pyrz, R., Thomsen, O.T., A novel image analysis procedure for measuring fibre misalignment in unidirectional fibre composites, Composites Science and Technology (2009) 69(2) 228-238
72. Liu F, Sutcliffe MPF, Graham WR. Modeling of tread block contact mechanics using linear viscoelastic theory. Tire Science and Technology. 36(3) 211-226 (2008)
73. Li ZY, Taviani V, Tang TY, Graves MJ, U-King-Im JM, Sutcliffe MPF, Gillard JH. The Haemodynamic Effects of in-tandem carotid artery stenosis: implications for carotid endarterectomy, Journal of Stroke and Cerebrovascular Diseases, 19(2) 138-145 (2010)
74. Kim DJ, Czosnyka Z, Keong N Radolovich DK,. Smielewski P, Sutcliffe MPF, Pickard JD, Czosnyka M. Index of cerebrospinal compensatory reserve in hydrocephalus. Neurosurgery 64(3) 494-501 (March 2009)
75. Kim DJ, Kasprowicz M, Carrera E, Castellani G, Zweifel C, Lavinio A, Smielewski P, Sutcliffe MPF, Pickard JD, Czosnyka M. The monitoring of relative changes in compartmental compliances of brain. Physiological Measurement 30 647-659 (2009)
76. Kim, D. J., Carrera, E., Czosnyka, Z., Keong, N., Smielewski, P., Balendent, O., Sutcliffe, M. P., Pickard, J. D., and Czosnyka, M., "Cerebrospinal compensation of pulsating cerebral blood volume in Hydrocephalus". Neurol Res 32(6) 587-592 (2010)
77. V. Taviani, A.J. Patterson, M.J. Graves, C.J. Hardy, P. Worters, M.P.F. Sutcliffe, J.H. Gillard, "Accuracy and repeatability of Fourier velocity encoded M-mode and 2D cine phase contrast for pulse wave velocity measurement in the descending aorta", Journal of Magnetic Resonance Imaging. 31(5) 1185-1194 (2010)
78. V. Taviani, A.J. Patterson, P. Worters, M.P.F. Sutcliffe, M.J. Graves, J.H. Gillard, "Accuracy of phase contrast, black-blood and bright-blood pulse sequences for measuring compliance and distensibility coefficients in a human-tissue mimicking phantom", Journal of Magnetic Resonance Imaging. 31(1) 160-167 (2010)
79. Wallace, A.M., Cutting, E.D., Sutcliffe, M.P.F., Langley-Hobbs, S.J. A biomechanical comparison of six different double loop configurations for use in the lateral fabella suture technique. Veterinary and Comparative Orthopaedics and Traumatology 21 (5), pp. 391-399
80. Yoo SH, Chang SH, Sutcliffe MPF. Compressive characteristics of foam-filled composite egg-box sandwich panels as energy absorbing structures. Composites: Part A, 41 (2010) 427-434
81. Liu F, Sutcliffe MPF, Graham WR. Prediction of tread block forces for a free-rolling tyre in contact with a smooth road. Wear. 269 672-683 (2010)
82. Lemanski SL, Sutcliffe MPF, Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness, Composites A 43:435-444 2012
83. Graham WR, Liu F, Sutcliffe MPF, Dale M. Characterisation and simulation of asphalt road surfaces. Wear 271(5-6):734-747 22 2011
84. McMillan AJ, Monroy Aceves C, Sutcliffe MPF. Moderate energy impact analysis combining phenomenological contact law with localised damage and integral equation method. International Journal of Impact Engineering 43(3):29-39 2012
85. Monroy Aceves C, Sutcliffe MPF, Ashby MF, Skordos AA, Rodríguez Román C. Design methodology for composite structures: A small low air-speed wind turbine blade case study. Materials and Design 36:296-305 2012
86. Sutcliffe MPF, Monroy Aceves C, Stronge WJ, Choudhry RS, Scott AE. Moderate speed impact damage to 2D-braided glass-carbon composites, Composite Structures 94:1781-1792 201
87. Nicholson I, Langley-Hobbs S, Sutcliffe M, Jeffery N, Radke H. Feline talocrural luxation: A cadaveric study of repair using ligament prostheses. Veterinary and Comparative Orthopaedics and Traumatology, 25(2) 116-125 201
88. Henderson J, Sutcliffe M, Gillespie P. Epitendinous suture techniques in extensor tendon repairs - an experimental evaluation. J Hand Surgery 36:1968-1973 2011
89. Henderson J, Sutcliffe M, P Gillespie P. The tension band principle and angular testing of extensor tendon repairs. J Hand Surgery: European Volume 36:297-302 2011
90. Liu F, Sutcliffe MPF, Graham WR. Prediction of tread block forces for a free-rolling tyre in contact with a rough road. Wear. 1-11 2012

Refereed conference papers

1. M.P.F. Sutcliffe and N.A. Fleck. 'Compressive failure of notched carbon fibre-epoxy laminates.' European Conference on Composites testing and standards, September 8-10th, 1992, pp 123-131 European Association for Composite Materials, Amsterdam, (1992).
2. Tabary P.E., Sutcliffe M.P.F., Porral F. and Deneuville P., 'Measurements of friction in cold metal rolling.' in "Tribology in Manufacturing Processes", edited by Dohda, K., Jahanmir, S. and Wilson, W.R.D., ASME, New York (1994).
3. Creighton, C.J. Ellis, J., Sutcliffe, M.P.F. and Clyne, T.W. The influence of processing variables on fibre alignment and compressive strength of unidirectional laminates, Proceedings of ECCM-9 (Abstracts), Brighton, 4-7 June 2000, IOM Communications (2000)
4. Creighton, C.J., Sutcliffe, M.P.F. and Clyne, T.W. Characterisation and control of fibre alignment during prepreg manufacture, Proceedings of ICCM12, Paris, 5-9 July 1999, (1999)
5. Le, HR and Sutcliffe, M.P.F. Surface finish of cold rolled aluminium foil, Proceedings of the conference on Modelling of Metal Rolling Processes 3, Dec. 1999, London, Institute of Materials pp 468-476 (1999)
6. Ahmed, R and Sutcliffe, M.P.F. Evolution of surface finish within the roll bite during cold rolling of stainless steel, Proceedings of the conference on Modelling of Metal Rolling Processes 3, Dec. 1999, London, Institute of Materials, pp390-399 (1999)
7. Sutcliffe, M.P.F. and Montmitonnet, P. A coupled tribological and mechanical model for thin foil rolling in the mixed lubrication regime, Proceedings of the conference on Modelling of Metal Rolling Processes 3, Dec. 1999, London, Institute of Materials pp 187-196 (1999)
8. Ahmed, R and Sutcliffe, M.P.F. An analysis of micro-plasto-hydrodynamic lubrication using a strip drawing rig, Presented at the 16th International Conference "CAPE 2000", 7-9 August 2000, Edinburgh, UK, Institution of Mechanical Engineers
9. Court, RS, Sutcliffe, MPF and Tavakoli, SM. Fracture and failure analysis of adhesively bonded joints by video imaging techniques, Proceedings of Adhesion '99, Cambridge, 15-17th Sept 1999, pp237-242
10. Sharma, S.B, Sutcliffe, MPF, Clifford, MJ and Long, AC. Experimental investigation of tow deformation during draping of woven fabrics, 4th International ESAFORM Conference on Material Forming, Liege, Belgium , 23-25 April 2001
11. Sharma, S.B and Sutcliffe, Draping of woven composites over irregular surfaces, 13th International Conference on Composite Materials (ICCM-13), Beijing, China, 25-29 June 2001
12. S.B. Sharma, M.P.F. Sutcliffe, "Draping of woven composites: a progressive drape model", Proc. 9th Int. Conf. on Fibre Reinforced Composites (FRC 2002), Newcastle-upon-Tyne, March 2002, pp337-344
13. Sutcliffe, MPF, Sharma, S.B, Long, AC, Clifford, MJ, Gil, RG, Harrison, P. and Rudd, CD. A comparison of simulation approaches for forming of textile composites, 5th International ESAFORM Conference on Material Forming, Kracow, Poland , 14-17 April 2002, pp311-314
14. Long, AC, Gil, RG, Clifford, MJ, Harrison, P, Sharma, S and Sutcliffe, MPF. Experimental analysis of fabric deformation during forming of textile composites, 5th International ESAFORM Conference on Material Forming, Kracow, Poland , 14-17 April 2002, pp279-282
15. R. S. Court, S. M. Tavakoli and M. P. F. Sutcliffe, Predicting Adhesive Joint Life-times, 25th Annual Meeting of the Adhesion Society and The Second World Congress on Adhesion and Related Phenomena (WCARP-II). February 10-14, 2002. Orlando, USA
16. Sutcliffe MPF, Combarieu, R, Repoux, M and Montmitonnet, P. Characterisation of friction during plane strain compression tests on aluminium strip. Euromech 435; Friction and wear in metal forming, June 18-20 2002, Valenciennes, France (June 2002), pp141-148
17. HR Le and Sutcliffe MPF. The role of lubricant entrapment in the evolution of surface pits in metal forming processes. Euromech 435; Friction and wear in metal forming, June 18-20 2002, Valenciennes, France (June 2002) , pp47-54
18. Le HR, Sutcliffe MPF. Evolution of surface pits on stainless steel strip in cold rolling and strip drawing. Proceedings of 2002 ASME/STLE Joint International Tribology Conference, Cancun, Mexico, October 27-30, (Oct. 2002)
19. Sharma, S.B and Sutcliffe, MPF. A simplified finite element approach to draping of woven fabric, 6th International ESAFORM Conference on Material Forming, Salerno, Italy, 28-30 April 2003 pp 887-890
20. Le, HR, Sutcliffe, MPF, Wang, PZ, Burstein GT. Development of metal-to-metal contact in forming of aluminium with boundary lubrication, 2nd International Conference on Tribology of Manufacturing Processes (ICTMP2004), Nyborg, Denmark, June 16-18 2004
21. Sutcliffe MPF, Combarieu, R, Montmitonnet, P. Plane strain compression tests of aluminium strip under boundary lubrication conditions. 2nd International Conference on Tribology of Manufacturing Processes (ICTMP2004), Nyborg, Denmark, June 16-18 2004
22. Skordos AA Monroy Aceves C, Sutcliffe, MPF. Development of a simplified finite element model for draping and wrinkling of woven material, 8th ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, 27-29th April 2005
23. Skordos AA, Monroy Aceves C, Sutcliffe MPF. Drape optimisation in woven composites manufacturing. Proceedings of the 5th International Conference on Inverse Problems in Engineering: Theory and Practice, Cambridge, UK, 11-15th July 2005
24. Monroy Aceves C, Skordos AA, Sutcliffe MPF. Design selection methodology for composite structures. 15th International Conference on Composite Materials ICCM15, 27 June-1 July 2005, Durban, South Africa
25. Utsunomiya, H, Sutcliffe, MPF, Shercliff, HR, Bate P, Miller, DB Evolution of matt surface topography in aluminium pack rolling, Proceedings of World Tribology Congress 2005 (Sept 2005)
26. Sutcliffe MPF, Liu F, Ling C, Le HR. Process map development for chemical mechanical polishing with low-K material. Proceedings of World Tribology Congress 2005 (Sept 2005)
27. Skordos AA, M. P. F. Sutcliffe MPF. Stochastic geometric properties of woven textiles" 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, May 1-4 2006, Rhode Island, US
28. Skordos AA, Sutcliffe MPF, Klintworth JW, Adolfsson JP. Multi-objective optimisation of woven composite draping using genetic algorithms. 27th International SAMPE Europe Conference, March 28-30 2006, Paris, France
29. Long AC, Skordos AA, Harrison P, Clifford, MJ, Sutcliffe MPF. Optimisation of sheet forming for textile composites using variable peripheral pressure. 27th International SAMPE Europe Conference, March 28-30 2006, Paris, France
30. Skordos AA, Sutcliffe MPF. Geometrical variability of woven textiles. Texcomp-8, Nottingham U.K. Oct 16-18 2006
31. Sutcliffe MPF and F Liu F. Development of a process map for low-k materials, 16th CMP Users Meeting, Semicon Europa 2006, 7th April 2006, Munich, Germany
32. Sutcliffe MPF. Micromechanics and compressive loading of composite materials. 27th Risř International Symposium on Materials Science; "Polymer Composite Materials for Wind Power Turbines", 4-7 Sept. 2006, Roskilde, Denmark
33. Zumpano G, Sutcliffe MPF and Stronge WJ. Impact damage to textile composites. Deformation and Fracture of Composites 9 (DFC9), Sheffield, 10-13 April 2007
34. Sutcliffe MPF. Effect of roughness in cold metal rolling. Int Conf on Tribology in Manufacturing Processes, ICTMP 2007, 24-26 Sept 2007, Yokohama, Japan
35. Sutcliffe MPF, Fox MN, Daley, JAB. Modelling of transfer film formation in rolling using plasticine. Int Conf on Tribology in Manufacturing Processes, ICTMP 2007, 24-26 Sept 2007, Yokohama, Japan
36. Scott P., Lees J.M., Sutcliffe M.P.F., Novel Modelling of Solution Uptake in CFRP Tendons, 8th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), July 16th-18th 2007, Patras, Greece, Editor, Triantafillou, T.C., ISBN: 978-960-89691-0-0, pp. 516-517 (extended abstract)
37. Sutcliffe MPF, Maguire JJ, Davenport AP. Correlation of the pharmacological response of human normal and diseased coronary arteries to endothelin-1 with passive stiffness. 3rd International symposium on Biomechanics in vascular biology and cardiovascular disease. Rotterdam, Netherlands, 24-25th April 2008
38. V Taviani, ZY Li, V Young, MPF Sutcliffe, P Wong, MJ Graves, JH Gillard. In vivo non-invasive high-resolution MR-phase-contrast-based determination of time-dependent elastic modulus in healthy arteries. 3rd International symposium on Biomechanics in vascular biology and cardiovascular disease. Rotterdam, Netherlands, 24-25th April 2008
39. ZY Li, V Taviani, TY Tang, MJ. Graves, JM. U-King-Im, MPF Sutcliffe, JH Gillard. The haemodynamic effects of in tandem carotid artery stenosis: implications for carotid endarterectomy. 3rd International symposium on Biomechanics in vascular biology and cardiovascular disease. Rotterdam, Netherlands, 24-25th April 2008
40. V Taviani, ZY Li, V Young, MPF. Sutcliffe, P Wong, MJ Graves, JH. Gillard. In vivo MRI-based estimation of time-dependent elastic modulus in healthy arteries. Proceedings of the ASME 2008 Summer Bioengineering Conference (SBC2008), June 25-29 2008, Marriott Resort, Marco Island, Florida, USA
41. V Taviani, M P. F. Sutcliffe, P Wong, ZY Li, V Young, M J. Graves, J H. Gillard. In vivo non-invasive high resolution MR-based method for the determination of the elastic modulus of arterial vessels. 30th Annual International IEEE EMBS Conference of the IEEE Engineering in Medicine and Biology Society in Vancouver, British Columbia, Canada, August 20-24, 2008, pp.5569-72.
42. Liu F, Sutcliffe MPF, Graham WR. Prediction of tread block forces for free-rolling tyres. 26th annual meeting and conference on Tire Science and Technology. Sept 25-26 2007, Akron, US
43. Sutcliffe MPF, Y Huang, Maguire JJ, Davenport AP. In vitro measurement of diseased coronary artery mechanical properties. 4th International symposium on Biomechanics in vascular biology and cardiovascular disease. Rotterdam, Netherlands, 16-17th April 2009
44. Monroy Aceves C, Sutcliffe MPF, Ashby MF, Skordos AA. Design selection of a wind turbine blade using prepreg materials. Proceedings ICCM-17, Edinburgh, 27-31 July 2009 (2009)
45. Zumpano Z, Sutcliffe MPF, Monroy Aceves C, Stronge WJ, Fox M. Impact damage to 3D woven CFRP composites plates. Proceedings ICCM-17, Edinburgh, 27-31 July 2009 (2009)
46. V. Taviani, A.J. Patterson, P. Wong, M.P.F. Sutcliffe, M.J. Graves and J.H. Gillard, "Phantom investigation on the accuracy of different pulse sequences for the determination of arterial distensibility", in Proc Intl Soc Magn Reson Med, Honolulu, 2009, p.3840.
47. Z.Y. Li, V. Taviani and J.H. Gillard, "The impact of wall shear stress and pressure drop on the stability of the atherosclerotic plaque", in Conf Proc IEEE Eng Med Biol Soc, Vancouver, 2008, pp.1373-6.
48. V. Taviani, Z.Y. Li, V. Young, M.P.F. Sutcliffe, P. Wong, M.J. Graves and J.H. Gillard, "In vivo MRI-based estimation of time-dependent elastic modulus in healthy arteries", in Proc of the ASME SBC2008, 193000, Marco Island (FL), 2008.
49. SL Lemanski, Sutcliffe MPF. Effect of waviness defects on plastic microbuckling of unidirectional composites, in Proc 14th European Conference on Composite Materials (ECCM14), 7-10 June 2010, Budapest, Hungary
50. Qu BB, Sutcliffe MPF. Modelling generation of fibre waviness during processing. , in Proc 14th European Conference on Composite Materials (ECCM14), 7-10 June 2010, Budapest, Hungary
51. J Henderson, MPF Sutcliffe, Mr P Gillespie. Dorsal-only Extensor Tendon Repairs - Angular Testing and the Tension Band Principle. BSSH/BAHT Autumn Scientific meeting, 11-12 Nov 2010, London
52. SL Lemanski, Sutcliffe MPF, Scott AE. Characterisation of waviness defects in industrial composite samples, in Proceedings ICCM-18, 21-28th August 2011, Jeju Island, Korea, (2011)
53. Sutcliffe MPF, Kim HJ, Chang SH, Huang Y. Development of a composite bone plate for fixation of a fractured tibia, in Proceedings ICCM-18, 21-28th August 2011, Jeju Island, Korea, (2011)
54. Aceves CM, McMillan AJ, Sutcliffe MPF, Stronge WJ, Choudhry RS, Care ICD, Low-Speed Impact Damage in Hybrid 2D-Braided Composite Plates, Proc TexComp 10, 25-29 Oct 2010, Editors: Binetruy C, Boussu F. 306-313. 2010, Lille, France
55. F. Battocchio, M.P.F. Sutcliffe, and F. Teschner. Dynamic simulation of long polymeric fibres immersed in a turbulent air flow. Proceedings of the IMSD2012 - The 2nd Joint International Conference on Multibody System Dynamics, May 29 - June 1, 2012 Stuttgart, Germany
56. CY Ooi, M Sutcliffe, A Davenport. A novel approach for estimating the local mechanical properties of atherosclerotic artery. Proceedings of ESB2012 - 18th Congress of the European Society of Biomechanics, Lisbon, Portugal, 1 July 2012 - 4 July 2012, Journal of Biomechanics 45 - Supplement 1, 2012, page S10
57. Fletcher TL., Kolias AG., Timofeev I., Corteen EA., Sutcliffe MPF., Hutchinson PJ. Engineering models of decompressive craniectomy, British Neurosurgical Research Group 2011 , Dundee, UK, 11th March, 2011
58. Fletcher TL., Sutcliffe MPF., Hutchinson PJ. Engineering models of decompressive craniectomy, Bioengineering11, London, UK, 12th September 2011.

Other publications

1. Sutcliffe, M.P.F., 1989, Friction and Lubrication in Metal Rolling , PhD thesis, University of Cambridge.
2. Xin X.J., Sutcliffe M.P.F., Fleck N.A. and Curtis P.T., 'Cambridge Composite Designer. A users manual.' Cambridge University Engineering Department, Report CUED MAT/TR139, (1995).
3. Sutcliffe M.P.F., Xin X.J., , Fleck N.A. and Curtis P.T., Composite Compressive Strength Modeller, Version 1.4 Cambridge University Engineering Department/DERA Farnborough , Report CUED/C-MICROMECH/TR 35 (2000).
4. Sutcliffe, M.P.F Surface finish and friction in cold metal rolling, in Metal forming science and practice, edited JG Lenard, Elsevier, Oxford, U.K. 2002

Software

Composite Compressive Strength Modeller (CCSM), 1999, lead author, with Xin, Fleck and Curtis

© 2011 Cambridge University Engineering Dept and Michael Sutcliffe.
Information provided by mpfs(updated Mar 2010)